Festool CTL MIDI Bedienungsanleitung PDF herunterladen (Seite 13)

CTL MINI/MIDI

9 Service and maintenance

Customer service and repair

only

through manufacturer or service work-

shops: Please find the nearest address

at:

www.festool.com/Service

Use only original Festool spare parts!

Order No. at:

www.festool.com/Service



Clean the level sensors

[4-1]

and empty the dirt

trap

[1-9]

regularly.

Observe the following instructions:

– The manufacturer or an instructed person must

perform a dust test at least once a year to deter-

mine whether the filter is damaged, the machine is

sealed properly and the monitoring features are

functioning correctly.

– Anything that cannot be cleaned must be discarded

in impermeable bags. Observe applicable disposal

regulations!

9.1 Changing the filter bag



Open the locking clips and remove the top section

of the machine

[3]



Changing the filter bag

- see printing on filter bag



Replace the top section of the machine and close

the locking clips.



A replacement filter bag can be stored in the stor-

age compartment

[2-4]

9.2 Changing the filter element



Open the locking clips and remove the top section

of the machine

[3]



Turn the top section of the machine so that the fil-

ter element is facing upwards (Fig.

[4]



Fold over the handle

[4-2]

and remove the holder

[4-3]



Remove the used filter element

[4-4]

and replace

with a new one.



Dispose of the used filter element in accordance

with statutory regulations.



Replace the holder

[4-3]

and fold over the handle

[4-2]

until it latches into place.



Replace the top section of the machine and close

the locking clips.



The order numbers for accessories, filters and

consumables can be found in the Festool cata-

logue or on the internet at www.festool.com.

10 Environment

Do not dispose of the device in house-

hold waste!

Recycle devices, accesso-

ries and packaging. Observe applicable

country-specific regulations.

EU only:

European Directive 2002/96/EC

stipulates that used electric power tools must be col-

lected separately and disposed of at an environmen-

tally responsible recycling centre.

Information on REACh:

www.festool.com/reach

11 EU Declaration of Conformity

We declare under sole responsibility that this product

complies with all the relevant requirements in the fol-

lowing Directives, standards and normative documents:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60335-1,

EN 60335-2-69, EN 55014-1, EN 55014-2, EN 61000-

3-2, EN 61000-3-3.

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical Docu-

mentation

2013-06-01

WARNING

Risk of injury, electric shock



Always disconnect the mains plug from the

socket before performing maintenance work on

the machine!



All maintenance and repair work which requires

the motor housing to be opened must only be

carried out by an authorised service workshop.

NOTE

Motor damage



Never operate the extractor without a filter ele-

ment fitted as the motor may become damaged.

EKAT

Mobile dust extractor Serial no.

CTL MINI 499590, 499591, 499592,

499593, 499594

CTL MIDI 499599, 499600, 499601,

499602, 499603

Year of CE mark: 2013

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Festool CTL MIDI Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Festool CTL MIDI